MC Series
MC Series

1/6

LS and LS RA cables are “top of the mark” examples of the SabreCable product line. They are fabricated using 100% Noise Free, Spiral Shield, SabreCable wire. These cables feature Neutrik NP2X-AU- and NP2RX-AU Silent connectors. Aside from being some of the highest quality connectors available, they allow instrument disconnect with no noise, pop or buzz whatsoever. This feature augments and simplifies instrument changes during live performance, as well as, initial connecting and disconnecting scenarios. As with all SabreCable products, they are fabricated under the tightest of quality control measures. Soldered connections are facilitated at temperatures just below the melting point of the component materials. These cables are thoroughly tested. LS and LS RA cables are covered under a lifetime warranty against defects in material or workmanship.

LS Series

NC Series

90S Series

EPC Series

ASC Series

EPC cables are produced in lenghts that are designed to accommodate connection of effects devices and stomp boxes of all types. They are constructed with two Neutrik Right Angle plugs and are fabricated using the same techniques and under the same quality control standards as all other Sabre products. Players consistantly report that changing their entire cable layout to Sabrecable, results in significant reduction in noise, an increase in fidelity, and in punch. SabreCable EPC (Effects Patch Cables) are thoroughly tested and are covered under under the Sabrecable lifetime warranty against defects in materials or workmanship.

90S cables are constructed identically to NC cables. They differ only in that they have a right angle plug on the instrument end. They are constructed with 100% Noise free, Spiral Shield, SabreCable wire. As with all SabreCable products, they are fabricated under the tightest of quality control measures. Soldered connections are facilitated at the highest possible temperatures. 90S instrument cables are thoroughly tested and are also covered under a lifetime warranty against defects in material or workmanship.

NC cables are constructed with the same 100% Noise Free, Spiral Shield, SabreCable wire. They are equipped with Neutrik NP2X finely machined, Nickel plated ¼” plugs. All Cables are made under tight quality control measures and connections are soldered at extremely high temperature. Strain relief is unique, as provided by a compression sleeve which fastens around the cable in a non-pinching 360 degree manner. All NC instrument cables are thoroughly tested and are covered under a lifetime warranty against defects in material or workmanship.

ASC (Amplifier Speaker Cables) are fabricated with 11Ga. Oxygen free copper, mega-stranded conductor wire. With one of the highest strand counts available - and the significant overall accumulation of copper mass – ASC cables deliver all the power the amplifier can produce. ASC cables are available in any connector configuration; including ¼” Switchcraft Jumbo, Neutrik NL4FC (speakon) and Heavy Duty Banana. Stock lengths are 3’ and 5’ - but any length can be obtained via special order. All special orders are welcome. ASC cables are thoroughly tested and covered under a lifetime warranty against defects in material or workmanship.

MC Series

SabreCable microphone cables are constructed using Mogami cable and Switchcraft

XLR connectors (others upon request). Choose either ultra low noise Mogami Neglex

Quad 2534 or low capacitance Mogami Neglex 2549, both well known for their rich fidelity.

Available colors include; Black, Red, Blue, and Yellow.